Tag: Lūžiai

  • Princo Ruperto stiklo lašas atlaiko milžinišką smūgį, bet įskilęs „uodegoje“ subyra į dulkes

    Example of Prince Rupert’s drops. Image via Wiki Commons.

    Prince Rupert’s drops are tadpole-shaped pieces of glass. But they don’t behave at all like you’d expect. Strike the fat end with a hammer and, astonishingly, the glass will likely stay intact. Snap the thin tail, however, and the entire drop can explode into thousands of glittering fragments.

    So, what gives?

    Scientists have known about these objects since the 17th century, and have been working to understand them ever since. Modern experiments have finally revealed how the trick works. A Prince Rupert’s drop is essentially a tiny reservoir of frozen mechanical stress — its surface squeezed powerfully inward while its core strains to pull apart. But that’s just the short version.

    And even after nearly 400 years of investigation, researchers are still finding new things inside these peculiar glass objects.

    A glass object loaded like a spring

    Prince Rupert’s drops from like this.

    A blob of molten glass falls into relatively cold water. The outside solidifies almost immediately, while the interior remains hot and soft for longer. The result looks like a clear glass tadpole: a rounded head narrowing into a long, delicate tail.

    But the important part is invisible.

    Tadpole-shaped piece of glass with a round top and and long narrow tail
    GIF via Reddit

    As the outer layer cools, it becomes rigid. The hotter interior then cools and tries to contract. But the already-solid shell restrains it.

    When the process ends, the drop has trapped a remarkable pattern of residual stress — stress that remains inside a material even when nobody is pushing or pulling on it.

    The surface sits in compression, meaning its glass is squeezed together. The interior sits in tension, meaning it is effectively being pulled apart. Neither side can relax.

    That difference gives the drop its extraordinary properties.

    Illustration of a Prince Rupert's drop showing the areas where tension and compression are at work.
    Illustration: ZME Science.

    In 2016, researchers used an optical technique called integrated photoelasticity to reconstruct the stress field inside Prince Rupert’s drops. They measured compressive stresses of roughly 400 to 700 megapascals near the surface — enormous values for glass. Experimental drops with heads only several millimetres across survived compression loads exceeding 10,000 newtons, although sufficiently large loads could still destroy them.

    For perspective, 10,000 newtons is roughly equivalent to the weight of a one-tonne mass under Earth’s gravity. That’s an extraordinary load for a glass object small enough to rest in your palm.

    A tough, but not unbreakable glass

    Strangely enough, Prince Rupert’s drops aren’t somehow intrinsically harder than ordinary glass. They’ve just been preloaded in exactly the direction that makes surface cracks difficult to start.

    But the protection comes at a price. The very stresses that defend the outside of the drop leave its interior much more vulnerable to destruction.

    If a crack penetrates that protective shell and reaches the tensile region, the situation reverses.

    Instead of suppressing the crack, the internal stress drives it forward.

    It’s like a spring wound so tightly that the smallest failure in the right place releases everything at once.

    The fracture races faster than a jetliner

    Graph showing how fast a crack in a Prince Rupert's drop travels, faster than the speed of sound
    Illustration: ZME Science.

    The tail provides the easiest route into that spring.

    Its narrowing geometry means a fracture in the right part of the tail can reach the stressed interior. Once it does, the stored elastic energy begins feeding the crack.

    The result is not simply one crack cutting the drop in half. It’s a chain reaction of fractures.

    In a landmark 1994 experiment, Srinivasan Chandrasekar and M. Munawar Chaudhri filmed disintegrating Prince Rupert’s drops at rates reaching about 500,000 frames per second.

    The crack front raced from the tail toward the head at roughly 1,450 to 1,900 metres per second — up to 6,840 kilometres per hour, several times faster than a passenger jet.

    As the fracture travelled through the tensile core, it repeatedly split into branches. Those branches divided again. Within microseconds, a single crack became a dense network of fractures.

    That branching, not a mysterious internal explosion, pulverizes the drop.

    The researchers also tested another explanation: perhaps a shock wave was racing through the glass and blasting it apart. But their high-speed experiments found no sufficiently strong separate stress wave to explain the destruction. The cracks themselves were doing the damage.

    Prince Rupert’s drop meets modern tech

    Researchers haven’t stopped studying these objects. Modern imaging has revealed just how extreme the process becomes.

    In 2021, researchers examined the fragments using high-resolution X-ray micro-computed tomography, essentially performing a three-dimensional scan of the debris.

    One drop had shattered into at least 21,847 separate fragments. Some of the pieces they measured were only about 50 micrometres across — thinner than a human hair.

    But strangely, there was a hidden pattern to these fractures. The fragments weren’t distributed randomly across every possible size. The researchers found characteristic fragment scales of about 0.31 millimetres and 0.064 millimetres. That suggests the internal stress of the drop helps determine how finely it breaks.

    In other words, the stresses don’t just determine whether the glass breaks. They also help shape the debris it leaves behind.

    Fragments on Prince Rupert’s glass. Image credits: Kooji at el / Nature Communications.

    This finding matters well beyond a laboratory curiosity. Scientists have long studied how brittle objects fragment, from ceramics and safety glass to rocks. Prince Rupert’s drops offer an unusually clean system in which the energy driving fracture is already stored inside the material before the first crack begins.

    There is one small caveat to the famous demonstration. Snapping the absolute finest tip of the tail doesn’t always destroy the drop. That extremely thin portion can carry relatively little residual stress. The fracture must reach far enough into the stressed structure to trigger the cascade.

    A mystery that reached the court of Charles II

    Prince Rupert did not invent Prince Rupert’s drops. Sorry.

    Objects like them were already known on the European continent before they acquired his name. Early sources called them Dutch tears or lacrymae Bataviae, although their precise geographical origin remains uncertain. Royal Society records suggest they were well known by the 1650s and may have come from the German region of Mecklenburg.

    Their English name came from Prince Rupert of the Rhine, a soldier, naval commander, artist and enthusiastic experimenter who brought examples to England in 1660.

    King Charles II became intrigued and sent specimens to the newly established Royal Society for investigation in 1661.

    Imagine being one of the scientists asked to explain them in the 17th century, without modern tech and knowledge.

    A transparent glass drop lies on a table. Someone strikes its bulbous head. Nothing happens. Then a finger or tool damages the tail and the object appears to turn instantly into powder.

    For the natural philosophers of the 17th century, it was an irresistible puzzle.

    Sir Robert Moray reported experiments on the drops to the Royal Society in August 1661. The Society’s archive still preserves his manuscript, An Account of Glasse Drops, dated 17 August 1661.

    17th-century researchers did their best

    Robert Hooke then subjected the objects to closer study.

    In his monumental 1665 Micrographia — better known today for its spectacular drawings of fleas, cork cells and microscopic structures — Hooke also examined Prince Rupert’s drops.

    He realized that the explanation must lie in how the glass cooled, and that the stresses created during cooling were central to its strange behaviour.

    Hooke lacked the concepts and instruments needed to map three-dimensional residual stress, but he had landed astonishingly close to the heart of the problem.

    It would take more than three centuries for technology to catch up with that insight.

    High-speed cameras could finally follow the fracture. Optical measurements could reveal the invisible forces inside an intact drop. X-ray tomography could count and measure the fragments afterwards.

    What began as an aristocratic curiosity became a remarkably useful laboratory for studying how brittle materials fail.

    Prince Rupert’s drop and modern safety glass

    The principle that protects a Prince Rupert’s drop also appears all around us.

    Consider the tempered glass used in shower doors, architectural panels and some other everyday glass products.

    Thermal tempering deliberately creates compression at the surface and tension inside. The exact geometry and stress levels differ, but the engineering logic remains the same: since dangerous cracks usually start at surfaces, put that surface into compression.

    That makes the glass more resistant to damage. But it also helps explain why strongly tempered glass can suddenly crumble into a multitude of small pieces when a crack finally penetrates the protective layer.

    Prince Rupert’s drops are an extreme, three-dimensional example of the same fundamental physics. The 2021 fragmentation research found important similarities between stressed drops and tempered glass plates.

    As studies keep showing, the strength of a material doesn’t depend only on what it’s made of. It also depends on the invisible forces locked inside it.

    The story is still evolving

    In June 2026, researchers published a new investigation that looked beyond those internal forces and examined something more subtle: the chemistry of the glass itself.

    Using atom probe tomography and other analytical techniques, the team investigated chemical variations across Prince Rupert’s drops.

    They discovered that the ratio of potassium to sodium increased from about 0.21 in the interior to 0.32 near the exterior — a change of roughly 52%.

    Why is that interesting? In certain types of chemically strengthened glass, exchanging smaller sodium ions for larger potassium ions can help create compressive stress near the surface. The researchers wondered whether a related compositional effect could contribute to the extraordinary strength of Prince Rupert’s drops.

    Their calculations suggested that the measured chemical differences could contribute to a somewhat higher compressive stress near the outer head. But that remains a proposed contribution, not a replacement for the well-established explanation based on rapid cooling.

    Four centuries after the Royal Society first investigated these objects, scientists are still finding new details inside them.

    And perhaps that’s why Prince Rupert’s drops remain so captivating. They’re not exotic substances or elaborate machines. They’re ordinary glass transformed by an extraordinary cooling process.

  • Kaulų nykimas prasideda po 40-ies: gydytojai įspėja, kokie ženklai reiškia lūžio riziką

    Kaulų nykimas prasideda po 40-ies: gydytojai įspėja, kokie ženklai reiškia lūžio riziką

    Osteoporozė dažnai vystosi tyliai: kol kaulai netampa trapūs, žmogus gali nejausti jokių aiškių simptomų. Pirmieji įspėjimai neretai pasirodo tik tuomet, kai jau įvyksta slankstelių, riešo ar šlaunikaulio lūžis, o tuomet gydymas ir grįžimas į įprastą ritmą tampa sudėtingesni.

    Tarptautinis osteoporozės fondas skaičiuoja, kad po 50 metų amžiaus su osteoporoze susijusį lūžį per likusį gyvenimą patiria maždaug kas trečia moteris ir kas penktas vyras. Ilgėjant gyvenimo trukmei, didėja ir vyresnio amžiaus žmonių dalis, todėl kaulų trapumas tampa vis aktualesne visuomenės sveikatos problema.

    Kas vyksta kauluose po 40-ies?

    Kaulas nėra „negyva“ struktūra: jame nuolat vyksta irimas ir atsinaujinimas. Jaunystėje kaulų formavimasis paprastai lenkia irimą, o didžiausia kaulų masė dažniausiai pasiekiama apie 20–30 gyvenimo metus, vėliau pusiausvyra po truputį krypsta kaulų nykimo kryptimi.

    Po 40 metų šis procesas daugeliui tampa ryškesnis, tačiau tempas skiriasi. Riziką didina paveldimumas, mažas kūno svoris, rūkymas, dažnesnis alkoholio vartojimas, judėjimo stoka, kai kurios endokrininės ar uždegiminės ligos, taip pat ilgalaikis tam tikrų vaistų vartojimas, pavyzdžiui, gliukokortikoidų.

    Moterims svarbus lūžis įvyksta menopauzės laikotarpiu, kai sumažėjus estrogenų kiekiui kaulų nykimas gali pagreitėti. Vis dėlto tai nereiškia, kad osteoporozė neišvengiama: didelę reikšmę turi tai, kokią kaulų „atsargą“ žmogus sukaupė jaunystėje ir kokie yra kasdieniai įpročiai vėliau.

    Ženklai, kurių nereikėtų ignoruoti

    Vienas pavojingiausių signalų yra vadinamasis mažos energijos lūžis, kai kaulas lūžta po menko sužeidimo, kuris sveikam žmogui paprastai nesukeltų rimtos žalos. Pavyzdžiui, pargriuvus iš savo ūgio, paslydus namuose ar net suklupus lauke.

    Kiti galimi osteoporozės požymiai dažnai siejami su slankstelių mikro- ar kompresiniais lūžiais: naujai atsiradęs nugaros skausmas, sumažėjęs ūgis keliais centimetrais, ryškėjanti kupra ar laikysenos pokyčiai. Tokiais atvejais gydytojai paprastai rekomenduoja įvertinti bendrą lūžių riziką, o ne laukti kito incidento.

    Svarbu suprasti, kad osteopenija ar osteoporozė nereiškia, jog lūš kiekvienas kaulas nuo menkiausio judesio. Tačiau liga didina tikimybę patirti lūžius, o ypač vyresniame amžiuje jie gali reikšmingai paveikti savarankiškumą ir ilgalaikę gyvenimo kokybę.

    Tyrimai ir prevencija: ką verta aptarti su gydytoju?

    Pagrindinis tyrimas, vertinantis kaulų mineralinį tankį, yra densitometrija, dažniausiai atliekama DXA metodu. Dažniausiai tiriamas juosmeninės stuburo dalies ir klubo kaulų tankis, o rezultatai įvertinami pagal T rodiklį, lyginant su jaunų sveikų žmonių kaulų tankiu.

    Įprastai T rodiklis nuo minus 1 ir aukštesnis laikomas normaliu, nuo minus 1 iki minus 2,5 rodo osteopeniją, o minus 2,5 ar mažesnis siejamas su osteoporoze. Vis dėlto gydytojai pabrėžia, kad vienas skaičius neatsako į visus klausimus, nes sprendžiant dėl rizikos vertinamas amžius, buvę lūžiai, gretutinės ligos ir kiti veiksniai.

    Prevencijoje vien kalcio nepakanka, nes kaulų apykaitai svarbios ir kitos grandys. Kalcio pasisavinimui reikalingas pakankamas vitamino D kiekis, vitamino D veiklai svarbus magnis, o kaulo „karkasui“ reikia baltymų, todėl mityba turi būti subalansuota, o ne paremta vienu papildų pasirinkimu.

    Kalcio šaltiniais dažnai laikomi pieno produktai, ypač fermentuoti, taip pat kalciu praturtinti augaliniai gėrimai, tofu, kai kurios daržovės ir žuvys, valgomos su ašakomis, pavyzdžiui, sardinės. Baltymų galima gauti iš žuvies, kiaušinių, pieno produktų, ankštinių, o magnio šaltiniais dažnai tampa riešutai, sėklos ir pilno grūdo produktai.

    Ne mažiau svarbus yra judėjimas, nes kaului reikia mechaninio krūvio, kad jis išlaikytų tvirtumą. Vien vaikščiojimo dažnai neužtenka, todėl prevencijoje dažniau minimi pratimai su savo kūno svoriu ir pasipriešinimu, o jei jau nustatyta osteopenija ar osteoporozė, krūvį patariama derinti individualiai, prireikus su kineziterapeutu.

    Gydytojai pabrėžia, kad kaulų sveikata nėra tik vyresnio amžiaus tema, nes didelė dalis rizikos susiformuoja dešimtmečiais anksčiau. Kuo anksčiau įvertinami rizikos veiksniai ir koreguojami kasdieniai įpročiai, tuo didesnė tikimybė išvengti lūžių ir jų pasekmių.

  • Osteoporozė vis jaunesniems: diagnozę išgirdo dar nesulaukusi 40-ies, o ženklai lengvai pražiūrimi

    Osteoporozė vis jaunesniems: diagnozę išgirdo dar nesulaukusi 40-ies, o ženklai lengvai pražiūrimi

    Osteoporozė dažnai laikoma vyresnio amžiaus žmonių liga, tačiau gydytojai vis dažniau pabrėžia, kad kaulų tankio mažėjimas gali paliesti ir jaunesnius. Ankstyvoje stadijoje ji paprastai nesukelia aiškių simptomų, todėl ilgai lieka nepastebėta, kol įvyksta lūžis po, atrodytų, menkos traumos.

    Pirmuoju pavojaus signalu neretai tampa kaulo lūžis krentant iš savo ūgio ar net atliekant įprastą veiklą. Vėliau gali atsirasti nugaros skausmai, ypač krūtinės ir juosmens srityse, mažėti ūgis, ryškėti kūno laikysenos pokyčiai, susiję su slankstelių mikrolūžiais.

    Apie tai, kaip netikėtai gali paaiškėti ši diagnozė, viešai pasakojo dietistė Katarzyna Błażejewska-Stuhr. Ji teigė, kad po dviejų lūžių per palyginti trumpą laiką gydytojas ortopedas atkreipė dėmesį į galimą kaulų trapumą ir rekomendavo papildomus tyrimus.

    „Nukritau ant šaligatvio, paslydau ir susilaužiau raktikaulį, jis subyrėjo į mažus gabalėlius, todėl prireikė operacijos ir tvirtinimo plokštele su varžtais“, – sakė Katarzyna Błażejewska-Stuhr.

    Ji nurodė, kad osteoporozės diagnozę išgirdo būdama 38 metų, o tai jai buvo netikėta. Medikai pabrėžia, kad tokiose situacijose svarbu įvertinti ne tik traumos mechanizmą, bet ir tai, ar lūžis neįvyko dėl sumažėjusio kaulų mineralinio tankio.

    Osteoporozės priežastys dažniausiai yra daugialypės. Kaulų masė natūraliai mažėja su amžiumi, o moterims riziką reikšmingai padidina menopauzė ir su ja susijęs estrogenų sumažėjimas, nes šie hormonai svarbūs kaulų apsaugai.

    Prie rizikos veiksnių taip pat priskiriami kalcio ir vitamino D trūkumas, fizinio aktyvumo stoka, rūkymas ir gausus alkoholio vartojimas. Didesnę tikimybę susidurti su kaulų trapumu turi ir žmonės, sergantys kai kuriomis lėtinėmis ligomis, pavyzdžiui, inkstų ligomis ar cukriniu diabetu.

    Gydytojai atkreipia dėmesį, kad osteoporozė gali būti ir antrinė, kai kaulų tankis mažėja dėl kitų būklių ar gydymo. Ypač svarbu įvertinti ilgalaikį tam tikrų vaistų vartojimą, pavyzdžiui, gliukokortikosteroidų, kurie gali neigiamai veikti kaulinį audinį.

    Nors didžiausia rizikos grupė išlieka vyresnio amžiaus žmonės ir moterys po menopauzės, osteoporozė nėra vien senjorų problema. Ji pasitaiko ir vyrams, ir jaunesniems asmenims, ypač jei yra hormonų sutrikimų, nepakankama mityba, valgymo sutrikimų, ilgalaikis nejudrumas ar intensyvus krūvis be tinkamo atsistatymo.

    Sunkiausios osteoporozės pasekmės siejamos su lūžiais, ypač šlaunikaulio kaklo, kurie vyresniems pacientams dažnai reiškia ilgą reabilitaciją, komplikacijų riziką ir ženkliai prastesnę gyvenimo kokybę. Dėl to profilaktika ir ankstyvas nustatymas laikomi kritiškai svarbiais.

    Kaip nustatoma ir gydoma?

    Osteoporozė dažniausiai patvirtinama įvertinus kaulų mineralinį tankį, o pagrindinis tyrimas tam yra densitometrija. Ji padeda ne tik nustatyti kaulų būklę, bet ir stebėti, ar taikomas gydymas veiksmingas.

    Gydymas paprastai apima gyvenimo būdo korekcijas, kalcio ir vitamino D užtikrinimą bei kritimų prevenciją. Fizinė veikla, ypač jėgos ir pusiausvyros pratimai, gali padėti stiprinti kaulus ir mažinti traumų tikimybę.

    Prireikus taikomas ir medikamentinis gydymas, kuriuo siekiama sulėtinti kaulų masės netekimą arba skatinti kaulo atsinaujinimą. Klinikinėje praktikoje naudojamos kelios vaistų grupės, o konkretus pasirinkimas priklauso nuo lūžių rizikos ir individualių paciento veiksnių.

    Mityba ir kasdieniai įpročiai

    Profilaktikoje svarbi visavertė mityba, užtikrinanti pakankamą kalcio ir vitamino D kiekį. Katarzyna Błażejewska-Stuhr yra minėjusi, kad dalį reikalingo kalcio galima surinkti su maistu, o kasdieniai pasirinkimai turi realią įtaką kaulų būklei.

    „Sauja riešutų kasdien yra svarbi ne tik dėl kalcio, bet ir dėl kitų sveikatai naudingų veiksnių“, – sakė Katarzyna Błażejewska-Stuhr.

    Specialistai pabrėžia, kad vien papildai problemos neišsprendžia, jei kartu išlieka rizikos veiksniai, tokie kaip rūkymas ar nejudrus gyvenimo būdas. Jei pasikartoja lūžiai po nedidelių traumų, verta pasitarti su šeimos gydytoju ar specialistais dėl išsamesnio ištyrimo.